Bernina Electronic 1008 - Page 42

MASTERING YOUR BERNINA
®
1/10/02
Electronic 1008/42
BERNINA
®
Electronic 1008
MASTERING
YOUR
BERNINA
®
FINE EDGE
Owner’s manual pg.____
• Select the Zigzag Stitch #2/green - SW 2 and SL 1.
• Select the left needle position.
• Fold under ½” hem allowance on one 6” edge and press.
• Place the fabric right side upper most, to the left of the guide on the foot and sew the edge.
• When completed, trim away surplus fabric from the wrong side, close to the stitch.
• Mount the sample.
Note: Reverse Pattern Foot #1 can be used - settings as above but use center needle position.
Fabric: Batiste, 6” x 4”
Needle: 70/10 Universal
Thread: 60 wt. needle and bobbin
Presser Foot: Edgestitch Foot #10 (optional accessory)