MASTERING YOUR BERNINA
®
1/10/02
Electronic 1008/43
BERNINA
®
Electronic 1008
MASTERING
YOUR
BERNINA
®
CORDED EDGE
Owner’s manual pg.____
• Fold under a ½” hem allowance on one 6” edge and press.
• Place the folded edge, right side up, against the left side of the center blade.
• Select the Zigzag Stitch #2/green - SW 2 and SL 1 or adjust as needed.
• Adjust the needle position so the stitch falls on the folded edge.
• The right swing of the needle should barely miss the edge of the fold, stitching in air.
• Sew 2 or 3 stitches and stop with the needle down.
• Raise the foot, insert the cord under the foot from the right, against the needle.
• Pull the cord up through the center slot of the foot and hold it against the left side of the guide.
• Continue stitching - the cord will feed into the zigzag stitch.
• Trim the excess fabric from the wrong side.
• Mount the sample.
Note: Cord can be a variety of types - Pearl Crown Rayon works well.
Fabric: Medium weight cotton, 6” x 4”
Pearl Crown Rayon cord
Needle: 80/12 Universal
Thread: To match cord
Presser Foot: Edgestitch Foot #10 (optional accessory)
To Next Page
Loading...
