MASTERING YOUR BERNINA
®
1/10/02
Electronic 1008/25
BERNINA
®
Electronic 1008
MASTERING
YOUR
BERNINA
®
BLIND HEM
Fabric: Heavy Flannel – 6” x 7”
Needle: 80/12 Universal
Thread: All-purpose
Presser Foot: Reverse pattern Foot #1 and
Blind Hem Foot #5
Owner’s manual pg.___
• Finish one 6” edge of the fabric following the steps of the previous exercise.
• Fold a 2” hem to the wrong side of the fabric and press.
• Attach Reverse Pattern Foot #1.
• Baste the hem in place, sewing about ¼” from the raw edge.
• Select the Blindstitch #3/green (SW 3mm and SL 2.25mm); attach Blind Hem Foot #5.
• Fold hem back to the right side over the basting line.
• Sew on the extended hem allowance, keeping the folded edge next to the guide on the foot.
• Adjust the stitch width if needed so that the needle barely stitches into the fold.
• Mount the sample with the edges folded back as shown in the drawing.
To Next Page
Loading...
