MASTERING YOUR BERNINA
®
1/10/02
Electronic 1008/39
BERNINA
®
Electronic 1008
MASTERING
YOUR
BERNINA
®
PICOT EDGE
Fabric: Lightweight single knit cotton, 6” x 4”
Needle: 80/12 Universal
Thread: All-purpose sewing thread
Presser Foot: Reverse Pattern Foot #1
Owner’s manual pg.____
• Select the Vari-Overlock Stitch #6/green - SW 4-5mm and SL 1.5mm.
• Fold under one 6” edge about ½” and press.
• Place fabric to the left and position it under the foot so that the stitch, when it swings to the right,
will just pass over the folded edge.
• On knit fabrics the surplus can be trimmed from the wrong side close to the stitch.
• On woven fabrics it is advisable to first sew a row of small zigzag stitches about ¼” from where
the picot edge will be. Then you will be able to trim close to these stitches after the picot has
been stitched.
• Trim and mount the sample.
This stitch is suitable only for fine, soft fabrics and is ideal for lingerie and nightwear.
To Next Page
Loading...
