Bernina Electronic 1008 - Triple Straight Stitch

MASTERING YOUR BERNINA
®
1/10/02
Electronic 1008/18
BERNINA
®
Electronic 1008
MASTERING
YOUR
BERNINA
®
TRIPLE STRAIGHT STITCH
Fabric: Denim, 4” x 6”
Needle: 90/14 Jeans
Thread: All-purpose
Presser Foot: Reverse Pattern Foot #1
Edgestitch Foot #10 (optional accessory)
Owner’s manual pg.___
• Cut the fabric in half lengthwise forming two pieces, 2” x 6” each.
• Select the Triple Straight Stitch #9/red.
• Sew the two pieces together with a
5
/8” seam allowance using Reverse Pattern Foot #1.
• Press the seam open.
• Change to Edgestitch Foot #10 and adjust the needle position to stitch through the seam allowance.
• Adjust the stitch length to 3.5mm.
• With the guide of the foot in the ditch of the seam, topstitch the length of the seam on both sides.