MASTERING YOUR BERNINA
®
1/10/02
Electronic 1008/19
BERNINA
®
Electronic 1008
MASTERING
YOUR
BERNINA
®
ZIGZAG SEAM
Fabric: Firm knit – 4” x 6”
Needle: 80/12 Universal
Thread: All-purpose
Presser Foot: Reverse Pattern Foot #1
Owner’s manual pg.___
• Cut the fabric piece in half lengthwise, creating two pieces, 2” x 6” each.
• Select the Zigzag Stitch #2/green – SW 1mm and SL 0.5mm.
• Position the fabric to produce a
5
/8” seam down one side.
• Stitch the seam.
• Clip one seam allowance in the middle.
• Press one part of the seam open and leave the other half closed, so the stitch is visible.
• Trim and mount the sample.
To Next Page
Loading...
