MASTERING YOUR BERNINA
®
1/10/02
Electronic 1008/20
BERNINA
®
Electronic 1008
MASTERING
YOUR
BERNINA
®
VARI-OVERLOCK SEAM
Fabric: Cotton Interlock, 4” x 6”
Ribbing, 2” x 4”
Needle: 80/12 Univeral
Thread: All-purpose
Presser Foot: Overlock Foot #2
Owner’s manual pg.___
• Cut an inside curve in one corner of the fabric to simulate a neckline.
• Select the Vari-Overlock Stitch #6/green; SW 4mm - 5mm and SL 1mm.
• Place folded ribbing along the curved edge of the fabric (ribbing and fabric, right sides together).
• Guide the raw edges of the fabric under the pin of the foot and stitch; stitch length and width can
be adjusted, if needed.
• Trim the sample and mount with the ribbing pressed to the finished position.
To Next Page
Loading...
