MASTERING YOUR BERNINA
®
1/10/02
Electronic 1008/44
BERNINA
®
Electronic 1008
MASTERING
YOUR
BERNINA
®
DESIGNER HEM
• Select the Straight Stitch #1/green.
• Select the left needle position.
• Turn the raw edge under
3
/8” and press.
• Stitch with the fold against the left side of the guide on the presser foot.
• Trim away seam allowance as close to stitching as you can get.
• Turn the first folded edge under again tightly and place the new fold against the left side
of the guide on the foot.
• Stitch again from the wrong side of the fabric as in the first step.
• A successful hem will have two parallel lines of stitching on the wrong side of
the hem and one showing on the right side.
• Trim and mount the sample.
This is a very narrow two-step hem, easily sewn on straight or bias grains.
Works great on sheer fabric.
Fabric: Medium weight cotton, 6” x 4”
Pearl Crown Rayon cord
Needle: 80/12 Sharp
Thread: All-purpose sewing thread
Presser Foot: Edgestitch Foot #10 (optional accessory)
To Next Page
Loading...
