MASTERING YOUR BERNINA
®
1/10/02
Electronic 1008/45
BERNINA
®
Electronic 1008
MASTERING
YOUR
BERNINA
®
ATTACHING ELASTIC LACE
Fabric: Nylon tricot, 6” x 4”
9” of elastic lace
Needle: 80/12 Universal
Thread: All-purpose sewing thread
Presser Foot: Reverse Pattern Foot #1
• Select the Running Stitch #7/green.
• Adjust stitch length to 1mm.
• Position the elastic wrong side down on the right side of the tricot along one of the 6” edges.
• Leave a tail of elastic at the back of the presser foot for a “handle”.
• Position the elastic so the stitching is at the bottom edge of the elastic lace.
• Stretch the elastic lace gently, as it is being sewn.
• After stitching, trim the surplus tricot from the wrong side of the elastic lace, close to the
stitching.
• Mount the sample.
To Next Page
Loading...
