Mastering
Your
BERNINA
®
BERNINA
®
Embroidery
Module/Machine
MASTERING YOUR BERNINA
®
EMBROIDERY MODULE/MACHINE
54
Notes
©2003 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Stitch Density (artista only)
artista 165E
Select alphabet; enter the letter B.
Select Layout 1; enlarge letter
200%.Touch Temporary Save.
Duplicate B 2x for a total of 3 Bs.
Using Retrieve and positioning
arrows, move one B to left, leave
one in center, and move one to
right. Tough Temporary Save.
Retrieve B on right; select Layout
2. Alter Stitch Density to 160%.
Touch Temporary Save.
Retrieve B on left; select Layout 2.
Alter Stitch Density to 40%. Touch
Temporary Save. Touch OK to
process the design. Embroider,
Trim and mount sample.
artista 200E
Select indicated motif. Select
Edit 1; touch Duplicate icon to
make a copy of the design. Touch
Edit 2; select Adjust Height/Width
icon. Increase height of motif to
140%. Move motif to upper right
corner.
Return to Edit 1; duplicate design
again. Touch Edit 2; return height of
design to 100%, then increase
width to 140%. Move motif to lower
left corner. Return to Edit 1; touch
OK to process design.
Embroider and trim sample, then
mount it on the following page.
artista 185E
Select alphabet; enter the letter B.
Select Layout 1; enlarge letter
200%.Touch Temporary Save.
Duplicate B 2x for a total of 3 Bs.
Using Retrieve and positioning
arrows, move one B to left, leave
one in center, and move one to
right. Tough Temporary Save.
Retrieve B on right; select Layout
2. Alter Stitch Density to 160%.
Touch Temporary Save.
Retrieve B on left; select Layout 2.
Alter Stitch Density to 40%. Touch
Temporary Save. Touch OK to
process the design. Embroider.
Trim and mount sample.
Deco 650
n/a
Embroidery Font
Deco 330
n/a
artista 165E
Swiss Block
artista 185E
Drifter
artista 200E
Drifter
Fabric & Stabilizer
8” x 10” rectangle
To Next Page
Loading...
