Bernina Embroidery Module - Changing Lettering Height

Mastering
Your
BERNINA
®
BERNINA
®
Embroidery Module/Machine
MASTERING YOUR BERNINA
®
EMBROIDERY MODULE/MACHINE
66
Notes
©2005 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Changing Lettering Height
(Deco 330 and artista 200E only)
artista 200E
Open the alphabet folders; select the Drifter alphabet. Enter the word
BERNINA; touch OK. Select the Medium Hoop.
Duplicate BERNINA to create a total of five copies. Use the Move Motif
and Retrieve functions to arrange the words as shown in the illustration.
Select the BERNINA at the top of the hoop. Touch the Letter Manipulation
symbol and change the Letter Height to 6mm. Touch OK. Use the posi-
tioning functions to move the word to Stitch Length knob = +500, Stitch
Width knob = 0.
Repeat this process for each BERNINA as indicated below:
Note: Stitch Width knob position = 0 for all words.
1st BERNINA Height = 6mm Stitch Length knob = +500
2nd BERNINA Height = 10mm Stitch Length knob = +350
3rd BERNINA Height = 14mm Stitch Length knob = +150
4th BERNINA Height = 18mm Stitch Length knob = -100
5th BERNINA Height = 20mm Stitch Length knob = -400
When the lettering combination is complete, touch OK.
Stitch. Trim and mount sample on following page.
Embroidery Motif
Deco 330
Gothic
artista 165E
n/a
artista 185E
n/a
artista 200E
Drifter
Fabric & Stabilizer
8” x 10” rectangle
Deco 330
Select Alphabet tab. Select small font size. Program BERNINA; touch
OK. Move word up.
Select Alphabet tab. Select medium font size. Program BERNINA: touch
OK. Move up.
Select Alphabet tab. Select large font size. Program BERNINA; touch
OK. Position as needed.
Embroider. Return carriage to stored position. Trim and mount sample.