Bertin Technologies ALPHAGUARD DF2000 - Page 38

38 WWW.BERTIN-INSTRUMENTS.COM
USER MANUAL
7.2.9.2 Set time zone
Select the time zone with or without daylight saving time (DST) via using the Scroll
up or
Scroll down
button and acknowledge by pushing the Enter button for 2 sec.
Set time zone
UTC: 10:27:47 11.08.2016
Local: 12:27:47 11.08.2016
Use ↑↓ to change and
press <┘key to accept !
11.08.16 12:27:47 4min
Time zone
DST
00
02+ :
Figure 36: Setting the time zone
7.2.9.3 Hide display content
When this selection is activated (“ON”), the display content is hidden during “lock
device” is activated (see 7.2.6).
Hide display content
11.08.16 12:27:47 4min
OFF
ON
Use ↑↓ to change and
press <┘key to accept !
Figure 37: Selection, whether the display content should be hidden
or not during “lock device” state
7.2.9.4 Set key code
The key code can be changed by using the Scroll up or the Scroll down button.
To go to the next digit push the Enter button briefly. The selection has to be
acknowledged by pushing the Enter button for 2 sec.