37 WWW.BERTIN-INSTRUMENTS.COM
7.2.9 Settings menu
The Settings menu, in two parts, provides the system settings of the AlphaGUARD.
Use the Scroll up
Scroll down button to navigate and push the Enter button to
enter the selected sub item.
Settings menu 1/2
11.08.16 12:27:47 4min
Set time zone
Set date & time
Set key code
Set units
Set backlight
Set contrast
Hide display content
Set alarm level
Settings menu 2/2
11.08.16 12:27:47 4min
Set RS232 baudrate
Set Interface
Show versions
Clear memory
Figure 34: Settings menu (2 pages)
7.2.9.1 Set date & time
Date and time can be adjusted by this menu item. The date has the format
DD.MM.YYYY, the time HH:MM:SS. The entries can be changed by using the
Scroll
up or the Scroll down button. The selection is acknowledged by pushing the Enter
button for 2 sec.
Set date & time
11.08.16 12:27:47 4min
13 07. . 2013
Use ↑↓ to change and
press <┘key to accept !
13 27: : 59
DD MM YYYY HH MM SS
Figure 35: Setting date and time
Just the units used for MultiSensor (l/min, °C, Pa) are transferred during data read
out by DataVIEW or DataEXPERT. All other units are converted to a percentage
presentation (0 % … 100 %) when being read out by DataVIEW or DataEXPERT.
To Next Page
Loading...