Chapter 4. Operation
26
•
Basic: It will only show the copy process (%) on LCD.
Data size
Q'ty of target
Copied sizeCopy process %
•
Show Timer: It will show the time for copy.
Elapsed time
•
Show Speed: It will show the speed of burning during copy process.
Speed of burning
8-3. Button Beep
This setting will allow you to set up to hear a beep when a button is pressed or
not.
8-4. Eject On Start
You can make the trays or discs eject once the system is booted up.
•
Eject All Discs: To eject all trays with disc inside once the system is booted
up.
•
Do Not Eject: No eject any tray or disc once the system is booted up.
•
Eject Target Only: Only eject target trays with disc inside once the system is
booted up.
•
Eject Source Only: Only eject source disc once the system is booted up.
•
Eject All Trays: To eject all trays once the system is booted up.
8-5. Reader Speed
This setting allows you to adjust the reading speed of source drive. The default
setting of reader speed of CD is 40X; DVD is 24X.
To Next Page
Loading...