Beta LaserMike LASERSPEED 8000 - Page 72

LaserSpeed 8000/9000 I/O Module Instruction Handbook
Operation
Part No. 93342 / Drawing No. 0921-01516 Page 72 of 84 Revision E (Dec 2013)
Status Register Format
MSB
LSB
bit
7
6:5
4
3
2
1
0
Status Bit
TOG
00
VALID
MP
SHUTTER
LASER
TEMP
TOG
Toggles after each update from the gauge. Each time this bit
changes value, the I/O Module has new data.
MP
Material Present Status Bit
0 - Material is Not Present
1 - Material is Present
VALID
Valid Measurement Status
Bit
0 - LaserSpeed gauge is not making
measurements
1 - LaserSpeed gauge is making
valid measurements
SHUTTER
Beam Shutter Status Bit
0 - Beam Shutter is Closed (no laser
emission)
1 - Beam Shutter is Open (laser
emission)
LASER
Laser Interlock Status Bit
0 - Laser is Off (no laser emission)
1 - Laser is ON (laser emission)
TEMP
Laser at Temperature
Status Bit
0 - Laser is not at the correct
temperature
1 - Laser is at the correct
temperature