Need help?Do you have a question about the Beta 350 and is the answer not in the manual?
General| Lubrication | Wet sump |
|---|---|
| Bore x Stroke | 88 mm x 57.5 mm |
| Starting System | Electric |
| Transmission | 6 speed |
| Rear Suspension | Monoshock |
| Front Brake | Single disc |
| Rear Brake | Single disc |
| Cooling System | Liquid-cooled |
| Engine Type | Single cylinder, 4-stroke |
| Clutch | Wet multi-disc |
Details on frame and engine identification numbers for VIN and serials.
Information on vehicle delivery, initial checks, and standard tool kit.
Guidelines for carrying loads and tyre specifications, pressure, and wear.
Instructions on how to engage and use the steering lock for security.
Diagram and list identifying the main motorcycle components.
Identification and function of clutch, brake, and gear levers.
Explanation of display functions: speed, odometer, trip meters, timers, and settings.
How to access and modify settings like wheel circumference, units, and backlight.
Operation of starter, lights, engine stop, horn, side stand, and kickstart.
Key dimensions, frame material, tyre sizes, and wheel specifications.
Fuel/oil capacities, suspension types, and front/rear brake system details.
Engine type, bore, stroke, displacement, compression ratio, and carburetor type.
Lubrication, cooling, spark plug, clutch, transmission, valve gear, ignition, starting.
Electrical system schematic for the RR 4t model.
Information on battery, fuses, and E3 version devices like AIS valve and catalytic converter.
Essential checks for engine oil, fuel, chain, tyres, brakes, cables, coolant, and electrical system.
List of approved lubricants for engine, gearbox, brakes, and fork.
Guidelines for the initial break-in period of the engine and drivetrain.
Procedures for cold starting, hot starting, and dealing with a flooded engine.
How to use the choke and adjust the idle speed via carburetor settings.
Proper procedures for opening the fuel tank cap and fuel cock, and fuel capacity.
Checking engine oil level and understanding the oil circuit diagram.
Step-by-step guide for changing engine oil and replacing oil filters.
Procedure for draining and refilling the gear and clutch oil.
Checking and restoring front brake fluid levels and bleeding the front brake circuit.
Checking and restoring rear brake fluid levels and bleeding the rear brake circuit.
How to check the wear condition of front and rear brake pads.
Checking the hydraulic clutch oil level and bleeding the clutch system.
Procedure for changing the oil in the telescopic front forks.
Steps for accessing, cleaning, and re-oiling the air filter.
How to remove, inspect, gap, and reinstall the spark plug.
Adjusting idle speed, checking carburetor wear, and float level.
Procedure for checking the coolant level and its capacity.
Best practices for drive chain care and checking for wear.
Instructions for checking and recharging the vehicle's battery.
Guidelines for washing the vehicle and performing checks after cleaning.
Tables detailing periodic maintenance tasks and intervals (vehicle and engine).
Steps to prepare the vehicle for storage and bring it back to service.
Adjusting the home position of the front brake lever and rear brake pedal.
Adjusting the clutch lever's home position and mounting the handlebars.
Adjusting the throttle control cable and checking/adjusting steering head play.
Adjusting fork rebound/compression dampers and shock absorber preload.
Procedure for checking and adjusting the drive chain tension.
Step-by-step instructions for replacing front and rear brake pads.
Procedure for accessing and replacing the headlight bulbs.
Guide for removing and replacing the rear optic batch assembly.
Common problems, their causes, and suggested remedies for the motorcycle.
To Next Page
