EasyManua.ls Logo

Beta RR 250 - Engine Starting and Flooding

Beta RR 250
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
OPERATION
32
GB
ENGINE START
COLD STARTING
1 Open fuel cock 1.
2 Take the vehicle off the stand.
3 Shift into neutral.
4 Operate choke 2 by pulling it until it
stops.
5 WITHOUT opening the throttle, fi rmly
and FULLY operate kickstart 3 or use the
electric starter.
6 After few seconds, push the starter 2 into
its initial position.
HOT STARTING
1 Open fuel cock 1.
2 Take the vehicle off the stand.
3 Shift into neutral.
4 WITHOUT opening the throttle, fi rmly
and FULLY operate kickstart 3 or use
the electric starter.
WHAT TO DO IF THE ENGINE IS
“FLOODED”
After a fall, the engine may receive more
fuel than is needed. Actuate the kickstart
3, 5-10 times or press the electric starter
button twice for 5 seconds. Subsequently
start the engine as described previously.
1
3
2

Table of Contents

Related product manuals