33
1
GENERAL INFORMATION
CONOSCENZA DEL VEICOLO
Capacità di riempimento RR 50 ENDURO-MOTARD-STD-RACING
• serbatoio carburante.............................................6 (lt)
di cui lt di riserva ....................................................1 (lt)
• liquido circuito di raffreddamento
ENDURO-MOTARD-STD ........................................... 500 (cc)
RACING ............................................................ 850 (cc)
• olio trasmissione nel carter............... 850 (gr.)/820 (cc)
Sospensione anteriore
• forcella idraulica con steli di Ø 41 mm (ENDURO-RACING)
• forcella idraulica con steli di Ø 36 mm (MOTARD - STD)
Contenuto olio nei gambi:
- Ø 41 Enduro quantità per stelo 395 cc.
- Ø 41 Racing quantità per stelo:
Gamba Dx. Livello olio130 mm senza molla e con
forcella a fine corsa, quantità 430 cc.
Gamba Sx. Livello olio 200 mm senza molla e con
forcella a fine corsa, quantità 400 cc.
- Ø 36 STD e Motard quantità per stelo 300 cc.
Sospensione posteriore RR 50 ENDURO - MOTARD - STD
• monoammortizzatore con regolazione precarico
molla
Sospensione posteriore RR 50 RACING
• monoammortizzatore con doppia regolazione di
estenzione e compressione
Freno anteriore e posteriore RR 50 ENDURO-MOTARD-STD-RACING
• a disco con comando idraulico
Filling capacity RR 50 ENDURO-MOTARD-STD-RACING
• fuel tank ................................................................... 6 (lt)
including reserve of ................................................ 1 (lt)
• cooling circuit liquid
ENDURO-MOTARD-STD ............................................
500 (cc)
RACING ............................................................ 850 (cc)
• crank case transmission oil ............. 850 (gr.)/820 (cc)
Front suspension
• hydraulic fork with 41 mm. Ø rods (ENDURO-RACING)
• hydraulic fork with 36 mm. Ø rods (MOTARD - STD)
Oil content in shafts:
- Ø 41 Enduro oil quantity in each fork leg 395 cc
- Ø 41 Racing oil quantity for rod:
RH rod. Oil level 130 mm without spring and with fork
at travel end. Oil quantity 430 cc.
LH rod. Oil level 200 mm without spring and with fork
at travel end. Oil quantity 400 cc.
- Ø 36 STD - Motard oil quantity in each fork leg 300 cc.
Rear suspension RR 50 ENDURO-MOTARD-STD
• Single shock absorber with spring preload
adjustment
Rear suspension RR 50 E
RACING
•Single shock absorber with adjustable rebound and
compression damping
Front and rear brake RR 50 ENDURO-MOTARD-STD-
RACING
• disk-type with hydraulic control
To Next Page
Loading...
Need help?
General
