Beta RR 50 CC series User Manual

1
GB
RR 50 CC ENDURO / ENDURO STD / MOTARD /
MOTARD STD / FACTORY / TRACK
Thanks for you preference, and have a good time! This hand-
book contains the information you need to properly operate and
maintain your motorcycle.
The data and specifications provided in this manual does not constitute an
engagement on the part of BETAMOTOR S.p.A. BETAMOTOR reserves the
right to make any changes and improvements to its models at any moment
and without notice.

Beta RR 50 CC series Specifications

General

Transmission	6-speed
Engine Type	Single-cylinder, 2-stroke
Cooling	Liquid
Fuel System	Carburetor
Rear Suspension	Monoshock
Front Brake	Disc
Rear Brake	Disc

Summary

Riding Safety Guidelines

Chapter 2: Operation

Checks and Maintenance Before/After Use

Procedures for pre-ride checks, post-ride washing, and breaking-in.

Fueling and Starting/Stopping the Engine

Instructions for fueling, starting the engine, and shutting it down.

Chapter 3: Checks and Maintenance

Gearbox Oil, Brake Fluid, and Air Filter

Procedures for checking gearbox oil, brake fluid, and air filter condition.

Spark Plug, Brake Pad, and Coolant Maintenance

Inspecting spark plug, checking brake pads, and verifying coolant level.

Maintenance Schedule

A detailed schedule of maintenance tasks and intervals.

Chapter 4: Adjustments

Brake, Clutch, and Engine Adjustments

Steering, Chain, and Shock Absorber Adjustments

Chapter 5: Troubleshooting

Troubleshooting Guide

Common problems, their causes, and recommended remedies.