Beta RR 50 CC series User Manual

3
CHECKS AND MAINTENANCE
36
GB
FRONT BRAKE
Check
To check the wear of the front brake pads,
visually inspect the caliper from below. The
lining on the visible ends of the two brake
pads should be at least 2 mm thick.
If this layer is thinner than 2 mm, replace
the pads immediately.
Note:
Check the brakes every 2.500 km/1.500
miles.
To replace, contact authorised Betamotor
customer service.
REAR BRAKE
Check
To check the wear of the rear brake pads,
visually inspect the caliper from below. The
lining on the visible ends of the two brake
pads should be at least 2 mm thick. Should
the lining be thinner, immediately replace
the brake pads.
Note:
Check the brakes every 2.500 km/1.500
miles.
To replace, contact authorised Betamotor
customer service.
2 mm
2 mm

Beta RR 50 CC series Specifications

General

Brand	Beta
Model	RR 50 CC series
Category	Motorcycle
Language	English