Better BT-1 - User-Defined and Kanji Character Modes

BT-1 user manual
Page 25 of 70
[Reference]
ESC !
E
SC % n
[Name]
Enable/Disable User
-
defined Characters
[Format]
ASCII:
ESC % n
Decimal:
27 37 n
1B 25 n
Hexadecimal:
0≤n≤255
[Range]
[Description]
Selects or cancels the user
-
defined character set.
λ
λ
λ
When the LSB of n is 0, the user
-
defined character set
is canceled.
When the LSB of n is 1, the user-defined character set is selected.
When the user-defined character set is canceled, the built-in
character set is automatically selected.
[Note]
λ
n is available only for the least significant bit
.
[Default]
n=0
[Reference]
ESC &
,
ESC ?
FS &
[Name]
Select Kanji character mode
ASCII:
[Format]
FS &
Decimal:
28 38
1C 26
Hexadecimal:
[Description]
[Note]
Selects Kanji character mode
For Kanji model:
λ
When the Kanji character mode is selected, the printer processes all
Kanji code as two bytes each.
λ
Kanji codes are processed in the order of the first byte and second
byte.
λ
Kanji character mode is not selected when the power is turned on.
[Reference]
FS .
FS.
[Name]
Cancel Kanji character mo
de
[Format]
ASCII:
FS
.
Decimal:
28 46
1C 2E
Hexadecimal:
[Description]
[Note]
Cancels Kanji character mode.
For Kanji model:
λ
When the Kanji character mode is not selected, all character codes
are processed one byte at a time as ASCII code.
λ
Kanj
i character mode is not selected when the power is turned on.
利用 pdfFactory Pro 测试版本创建的PDF文档 www.pdffactory.com