Better BT-1 - Kanji Print Modes and Character Definition

BT-1 user manual
Page 26 of 70
[Reference]
FS &
FS ! n
[Name]
Set print mode(s) for Kanji characters
[Format]
ASCII:
FS
!
n
n
Decimal:
28
33
21
Hexadecimal:
0≤n≤255
1C
n
[Range]
[Description]
Sets the print mode for K
anji characters, using n as follows:
Bit
Off/On
Hex
Decimal
Function
0
1
2
－
－
－
00
04
00
08
－
－
－
00
80
－
－
0
Undefined.
－
Undefined.
Off
On
Off
On
－
Double-width mode is OFF.
Double-width mode is ON.
Double-height mode is OFF.
Double-height mode is ON.
Undefined.
4
3
0
4
5
6
7
－
－
－
0
－
Undefined.
－
Undefined.
Off
On
Underline mode is OFF.
Underline mode is ON.
128
[Note]
λ
λ
When both double-width and double-height modes are set (including
right- and left-side character spacing), quadruple-size characters are
printed.
The printer can underline all characters (including right- and left-side
character spacing), but cannot underline the space set by HT and
90° clockwise-rotated characters.
λ
λ
When some of the characters in a line are double or more height, all
the characters on the line are aligned at the baseline.
It is possible to emphasize the Kanji character using GS !; the setting
of the last received command is effective.
[Default]
n=0
[Reference]
GS !
ESC & y c1 c2 [x1 d1...d(y
×
x1)]...[xk d1..
.d(y
×
xk)]
[Name]
Define user
-
defined characters
[Format]
ASCII:
ESC & y c1 c2[x1 d1...d(y×x1)]...[xk d1...d(y×xk)]
Decimal:
27 38 y c1 c2 [x1 d1...d(y×x1)]...[xk d1...d(y×xk)]
1B 26 y c1 c2 [x1 d1...d(y×x1)]...[xk d1...d(y×xk)]
Hexadecimal:
y=3
[Range]
32≤c1≤c2≤126
利用 pdfFactory Pro 测试版本创建的PDF文档 www.pdffactory.com