Better BT0323 - Remote Controls

3
Remote Controls
Power on/off: Press to turn on/
off the unit.
Replacing the lithium battery of
remote control unit.
Whentherangeofoperationofthecard
remote control becomesshort ornofunction,
replace the lithium battery with a new one.
Make sure the battery polarity replacement is
correct.
1.Pulloutthebatteryholderwhilepressingthe
stopper.
2.Insert the button-type lithium battery with
the(+)markfacingupward.Insertthebattery
holder into the remote control.
1 2
(CR 20 2 5)
1.Zoom(DVD/VCDonly)
2.Title(DVDonly)
3.Poweron/off
4. Setup
5. Menu cursor
6. Enter
7. Program
8. Digit area
9. -Shortpresstoselectaudiomenu,and
 rotatetheknobtoadjustlevel.
 -Longpresstoenterintosettingmenu,
then each press changes the mode.
10. Volume
11. Mute
12. - Radio tune
- Track skip/seek
13.Subtitle(DVDonly)
14.-Aux
- I-MODE
 -BTMUSIC(inBluetoothmode)
- Tuner
 -Disc(whendiscinserted)
 -USB(whenUSBinserted)
 -Card(whenSD/MMCinserted)
15. Repeat
16. Repeat A-B
17. Stop/Return
18. Play/Pause
19. Goto search
20. - DVD menu
 -PBC(forVCD2.0orup)
21.-OSD:Onscreendisplay
 -AMS:Radiopresetscan/Radioauto
preset
22. - DVD audio
- VCD audio L/R/ST
23.-Shortpresstoswitchtoclockdisplay,
 pressagaintoexit.
- Long press to enter clock setting.
 -Returntopreviousmenu(Settingmenu)
24.-Angle(DVDonly)
 -Hangupthecall
25.-VideosystemNTSC\PAL\AUTO
 -Radioband(inRadiomode)
 -REDial/Answer/Transferthecall
 (Bluetoothmode)