Better BT0323 - Radio Mode

7
Radio Mode
Selecting a Band
Press BAND once or more to select FM1 -
FM2 - FM3 - AM1 - AM2.
Display shows wave band, frequency, and
preset station number if already stored.
Selecting a Station
Press the or tuning button to tune to
another station.
Tuning
- AUTO SEEK
Press the
or buttonstoseekthenext/
previousstationautomatically.
- MANUAL SEEK
Press and hold the
or buttons to enter
manual tuning mode. Press the buttons again
to move the radio frequency number up or
downonestep.
Note:
• Duri ng manu al seek ing,  if  th e p aus e
betweentwooperating stepsis longerthan
5seconds,whenyoucontinue topress
the
or buttons
, the unitwill enter auto
seeking.
• Duringmanualseeking,whenyoupressand
hold the
or buttons
,theunitwillseek
continuously.
Preset Mode
Sixnumberedpresetbuttons store andrecall
stations for each band. The stored stations
(1-6) for thecurrentband canbe viewed on
the screen.
Storing Stations
- Auto storing
1.Selectaband(ifneeded).
2. Press AMS briefly to search all stations in
the band, the6strongest available station
will be automatically saved in the preset
button(numbers1-6).
- Manual storing
1.Select a band (ifneeded),then select a
station.
2.Press and hold a preset button (numbers
1-6)onthefrontpanelorremotecontrol.
Recalling a Station
1.Selectaband(ifneeded).
2.Pressapresetbutton(numbers1-6)onthe
front panel or remote control to select the
corresponding stored station.