Beurer BM 45 - 5. DEVICE DESCRIPTION; Information on the display

30 31
device can lead to an increase in electromagnetic emis-
sions or a decrease in the device’s electromagnetic im-
munity; this can result in faulty operation.
• Keep portable RF communication devices (including pe-
ripheral equipment, such as antenna cables or external
antennas) at least 30 cm away from all device parts, in-
cluding all cables included in delivery.
• Failure to comply with the above can impair the perfor-
mance of the device.
5. DEVICE DESCRIPTION
The associated drawings are shown on page 3.
1
Cu
2
Cu line
3
Cu connector
4
Connection for mains
part* (rear of device)
5
Display
6
Memory buttons M1/M2
7
Start/stop button
8
Risk indicator
9
Connection for cu connector (left-hand side)
* not included in delivery
Information on the display
10
Date / time
11
Systolic pressure
12
Diastolic pressure
13
Calculated pulse value
14
Pulse symbol
15
Release air
16
Number of memory space/memory display average
value ( ), morning ( ), evening ( )
17
Battery replacement
symbol
18
User memory
19
Risk indicator
20
Cardiac arrhythmia
symbol
6. USAGE
6.1 Initial use
Inserting the batteries
• Remove the battery compartment cover on the back of
the device
A
.
• Insert four 1.5 V AA (alkaline type LR6) batteries. Insert
the batteries, making sure the polarity is correct accord-
ing to the label
A
.
• Close the battery compartment cover.