Bewator Codoor CD3500 - Where Can Codoor be Fitted

- 17 -
15 Where can Codoor be fitted?
Codoor is suitable for most doors with handle-operated mortice
locks. Check suitability by simply measuring your own lock: the
distance between the center of the handle follower and the
center of the cylinder follower should be between 105 and 116
mm.
Codoor may be used with any of the following types of lock:
ASSA 760 Requires locking of upper latch bolt into lock case (daytime)
762 - ” -
500/4 - ” -
500/9 - ” -
765 Requires dead bolt to be retracted into lock case (daytime)
1520 - ” -
2000 - ” -
8761 Opened with key or handle (deadlocked bolt).
8762 - ” -
8765 - ” -
Codoor is only for internal fitting and operation
and should not be specified for back to back
installation