What to do if my Beyerdynamic Receiver has no reception?
If your Beyerdynamic Receiver shows no reception, ensure the transmitter is switched on. Also, verify that the transmitter is operating on the correct channel and adjust the frequency using the ACT function. If you're using remote antennas, inspect the antenna cables for any defects.
Why is the sound distorted on my Beyerdynamic opus 800?
If your Beyerdynamic Receiver's sound is distorted, the input amplifier of the connected mixer might be overloaded. Try using the gain control on the mixer or adjust the volume to resolve this issue.
How to fix a Beyerdynamic opus 800 that has no function?
If your Beyerdynamic Receiver isn't functioning, ensure that the power supply unit is correctly connected to both the mains and the receiver. Connect the receiver to AC power.
What to do if my Beyerdynamic opus 800 Receiver has no sound but RF-indication is okay?
If your Beyerdynamic Receiver has no sound, but the RF-indication is okay while the AF- indication is missing during modulation, then the wrong indication might be caused by strong interference signals. In this case, select another receiving channel. Also, ensure that a suitable microphone is connected.
General| Brand | Beyerdynamic |
|---|---|
| Model | opus 800 |
| Category | Receiver |
| Language | English |
Identifies front and rear panel controls and indicators for the receiver.
Covers connecting antennae, initial setup, and LC-display functions.
Details the ACT function and remote antennae connection/positioning.
Details on the ZAS 800 antenna splitter, its controls, and installation.
Instructions for connecting the receiver to a PC for control and operation.
Identifies controls and indicators on the handheld transmitters.
Guide for inserting batteries and understanding battery status indicators.
Explains the LC-display and provides maintenance instructions for transmitters.
How to adjust the sensitivity settings on the handheld transmitters.
Identifies controls and indicators on the beltpack transmitter.
Guide for battery installation and initial transmitter setup.
Covers input gain adjustment and AF connection types.
Explains LC-display, battery status, and how to switch off the transmitter.
Procedures for changing batteries and performing a soundcheck.
Tips for positioning transmitters and avoiding interference or feedback.
Common problems and solutions for the NE 800 receiver.
Common problems and solutions for handheld and beltpack transmitters.
Details on Opus 800 receiver components and modules.
Details on SDM, SEM, and TS series transmitter components.
List of optional accessories available for the Opus 800 system.
Detailed technical specifications for the NE 800 Diversity Receiver.
Detailed technical specifications for SDM and SEM handheld transmitters.
Detailed technical specifications for the TS 800 beltpack transmitter.
Detailed technical specifications for the ZAS 800 antenna splitter.
To Next Page
