15
10. PUTTING THE MACHINE OUT OF SERVICE
10.1 Putting the machine out of service tempora-
rily
· Carry out all the cleaning and maintenance operations.
· Disconnect and wrap up the power supply cable.
· Disconnect the water supply tube.
· Cover the machine and store it in a dry place, not exposed to
bad weather and with exclusive access.
For the conduction of the machine disconnection operations from
theutilitysupplymains,pleasecontactqualiedpersonnel.
10.2 Putting the machine out of service denitely
· Disconnect and wrap up the power supply cable.
· Disconnect the water supply tube.
· Cut off the supply cable, pack up the machine and deliver it to
personnelinchargeofspecicallycertiedwasterecyclingor
used machinery collection centres.
11. TROUBLE SHOOTING
The following are inspection operations that can be carried out by the operator with the machine powered down and
unplugged from the power mains. For any other type of anomaly or non-specied machine inconveniency, unplug the
machine from the power mains, do not proceed with direct attempts at repairing the machine and immediately contact
qualied and authorised sales service network personnel.
1) The machine will not start up: - Check to ensure that the power mains plug has been plugged
in correctly
- Check to censure that the differential, magneto-thermal and
main switches are all correctly engaged
- Check the condition of the power supply cable and mains plug.
If they are damaged, please contact qualied and authorised
personnel for replacement.
2) Water found under the machine - Check to censure that the tray discharge is not obstructed.
3) Slow dispensing speed - Check lter and spout/sprayer conditions to make sure they
are clean.
- Check to make sure that the coffee has not been ground too
nely
4) Irregular steam supply - Check to censure that the spout nozzles are not obstructed.