OPERATION COMFORT CIRCLE
40
4.6.4 Faults
S
The message S indicates that there is a fault. Next to it,
the fault code is displayed.
Warning:
w Some faults may cause material damage or physi-
cal injury if disregarded. If S is displayed,
refer to section
7.4 and, if necessary, alert the
installer or other expert.
Note:
n The fault code will disappear when you press a key.
The message S will however remain visible as long
as the fault is not corrected.
If a fault code is displayed without the message S, the
fault occurred in your absence, and has been resolved in the
meantime. You need not undertake action unless the fault
keeps returning.
storingscode
To Next Page
Loading...