Bigab 7-10 - Introduction

      G  G
4
© 2021 FORS MW Ltd
INTRODUCTION
This Manual gives the owner/operator information about maintaining and servicing the BIGAB hook-
lift trailer and provides instruction for safe and proper use of the machine.
Even if you have experience of this type of product, we ask that you read and understand the contents
of this manual completely and become familiar with your new machine before operating it. This Man-
ual contains information that could be vital for safety and eciency, as well as to ensure the validity of
the factory warranty.
If you have questions concerning information or availability of manuals in other languages, contact
your dealer.
Throughout this manual, information is provided by the sign
- read carefully and comply with
these messages – it will improve your operating and maintenance eciency, help avoid breakdowns
and damage, and extend your machine’s life.
Message
NOTE! indicates that the product, process or environment may cause damage, as well as
indicating the risk of minor injuries. These markings are used to draw the attention of readers to the
fact that this is an area of particular importance.
Do not use this machine for any applications or purposes other than those described in this manual or
applicable for approved attachments. If the machine is to be used with special attachments or equip-
ment other than those approved by Fors MW, consult your dealer. Any person using unapproved at-
tachments or making unauthorized modications is responsible for the consequences.
The dealers are ready to provide you with any assistance you may require, including providing genu-
ine service parts. All service parts should be obtained from your dealer. Provide complete information
about the part and include the model and serial numbers of your machine.
Please be aware that Fors MW continuously improves its products and reserves the right to make
changes and improvements in the design, construction and also in instructions of any part without
obligation to install such changes on any unit previously delivered
.
Fors MW conforms to ISO  for safety marking in accordance with the directive //EC.
Manufacturer: Dealer:
AS FORS MW
TULE 
  SAUE
Tel: +   
www.forsmw.com