G G
24
© 2021 FORS MW Ltd
MAINTENANCE MATERIALS
NOTE:
When changing oil, collect the oil in a safe manner. Never release oil onto the ground. This is
prohibited by law. Oil and grease must, by law, also be disposed of at an authorized location.
Table 2. Recommended lubricants
Brand Type
BP Energrease LS-EP2, L2M
ESSO Beacon EP2, Multipurpose GR Moly
MOBIL Mobilux EP2, Mobil Grease MP Special
SHELL Alvania EP Grease 2
UNION/TEXACO Marfak Multi-Purpose 2, Molytex Grease 2
Recommended hydraulic oils: UTTO or STOU SAE1oW/3o, SAE 32, SAE 46.
NOTE: Use only hydraulic uids recommended for your tractor hydraulic system by the manufacturer.
TIGHTENING TORQUES
The tightening torque (Mv) in Nm for untreated, oiled steel screw joints when using a torque wrench or
screwdriver/wrench with torque control. Torque range max. ± 5%. Metric coarse threads. All bolts must
be tightened after 10 hours of operation.
Table 3. Tightening torques
Thread M
Property class according to ISO 898/1
8.8 10.9 12.9
5 5.7 8.1 9.7
6 9.8 14 17
8 24 33 40
10 47 65 79
12 81 114 136
14 128 181 217
16 197 277 333
18 275 386 463
20 385 541 649
22 518 728 874
24 665 935 1120
To Next Page
Loading...
