Bigab 7-10 - Safety Regulations; General Safety Information; Safety Messages

      G  G
www.forsmw.com
5
SAFETY REGULATIONS
GENERAL SAFETY INFORMATION
Carefully read through the user manual before using the hook lift
trailer. Important data relating to your particular trailer can be
found in the trailer’s technical data. Incorrect usage can result in
injuries to you and damage to the trailer.
Operating a trailer requires a high level of expertise, as well as knowledge about the machine you are
using. It is important for you to train with regard to the trailer’s behaviour. Practice the movement
pattern and always work with smaller loads until you are completely familiar with operating the trailer.
BIGAB Hooklift is intended for use in agricultural, construction and community work for collection and
transportation of waste, scrap, agriculture and other goods.
Bigab Hooklift is not intended for use in transporting people or animals.
Take care to ensure that nobody is within the safety zone 20m.
The recommended ambient working temperature for this machine is -30°C to +40°C.
SAFETY MESSAGES
• Read carefully and understand the user manual before using the device. Consult the user
manual to solve your problems.
• Follow instructions to avoid the risk of accidents. The manufacturer and dealer are not
responsible for any damage in the event of failure to comply with these instructions.
• It is prohibited for unauthorised parties to be within the trailer’s risk zone, which is 20 m! The
user must have full visual control over the working area. Always maintain a visual check on the
work area. Never stand or walk under suspended loads.
• It is important for you to adapt your speed to the driving situation. Drive carefully on sideways
inclines. The same applies on slopes.
• Never drive under obstacles such as bridges, electrical cables, etc with the container bridge
raised.
• Risk of overturning. Ensure that the trailer is always standing on rm ground. Never overload
the trailer.
• Stop working by switching o the engine, engage the parking brake and remove the ignition
key to prevent unauthorised usage.
• Carefully read through the warning information on the oil and grease products you are
using, and follow their instructions accurately! During service works wear correct protective