Bigab 7-10 - Operation; Controls and Displays; Unloading Trailer

      G  G
www.forsmw.com
9
BIGAB hook trailer ID plate
ID plate contains trailer specic technical data. This plate can be
country specic.
RUP type approval plate
If your trailer is equipped with type approved RUP, it is labelled with
type approval plate that contains RUP specic type approval data.
OPERATION
CONTROLS AND DISPLAYS
The BIGAB hooklift trailer is only intended to be used and operated from the tractors’ driver seat
through the tractor hydraulic lever. Always adapt your operations to your level of experience, current
load and road conditions. Do not exceed the trailers maximum travel speed and maximum loading
values.
NOTE: If damage should occur during use, the work must be stopped immediately.The fault should
be identied and eliminated before starting to use the trailer again.
NOTE: It is recommended to place load symmetrically. Always be sure that the container is rmly
xed before driving. Long containers need enough working space and turning area. Never make sharp
turns at a high travel speed.
Don’t forget to lift the parking leg up before driving.
UNLOADING THE TRAILER
When unloading (loading) the trailer from the transportation platform the general principles of
workplace rules for health and safety shall be complied. The hooklift trailer is rmly attached to the
transportation platform with straps and chains. Wheels are secured by wedges or other objects without
sharp edges to avoid rolling.
Before starting up, check visually that the trailer is not damaged during transportation. If the trailer
is damaged, inform the company that transported the trailer and the dealer or manufacturer of the
product immediately (follow CMR).