BIGTREETECH MINI12864 V1.0 SHENZHEN BIGTREE TECHNOLOGY CO., LTD
4 Notes:
1. The wiring process must be carried out under the premise of power loss,
after checking that the line is properly connected and the drive is inserted
correctly before powering up, to prevent the fault wire from causing the
board and screen to burn, resulting in unnecessary damage;
If you also encounter other problems in use, you are welcome to contact
us, we will be patient to answer for you, if you have any good comments
or suggestions on our products, you are also welcome to give back to us,
we will carefully consider your comments or suggestions, thank you for
choosing BIGTREETECH products, thank you!
To Previous Page
Loading...
Need help?
General
