SKR Pro V1.2 User Manual Shenzhen Biqu Technology Co., Ltd.
2 / 18
Ⅰ、Product introduction
Aiming at some problems existing in 3D printed motherboards in
the market. Bigtree Technology Co., Ltd. launched a high
performance 3D printer master board with STM32F407ZGT6 as the
core controller, BIGTREETECH-SKR-PRO-V1.2.
Ⅱ、the motherboard features
1) The main control uses the ARM-level Cortex-M4 series with a
32-bit dominant frequency of 168 MHz STM32F407ZGT6 chip,
performance is greatly improved;
2) Equipped with highly modular open source firmware Marlin2.0, it
is convenient for users to DIY and further-development, to avoid
the worry of not being able to master the core code;
3) Visual Studio Code is a powerful development tool for Marlin2.0.
Its integrated development environment has the following
advantages: it supports online debugging, which is more helpful for
product development and performance optimization, and uses C
language for development, which is easy to get started.
4)The PCB board layout is rigorous and beautiful, and it is specially
designed for heat dissipation.
5)Using a dedicated power chip, support 12-24V power input,
To Next Page
Loading...
