BIGTREETECH SKR-PRO-V1.2

SKR Pro V1.2 User Manual Shenzhen Biqu Technology Co., Ltd.
13 / 18
5, USB and U disk selection
As shown in the picture, when the jumper cap is
connected to the left, the USB function is turned on while
the USB flash drive function is turned off; when the jumper
cap is connected to the right, the USB flash drive function is
turned on, and the USB function is turned off.
Note: at present, the firmware does not support the USB disk
function for the time being.
①USB online printing function↓ ② U disk function↓