Billabong Phasher - Reset Procedure

5.
ENGLISH
RESET PROCEDURE:
1. Hold down the LIGHT, MODE, START and RESET
buttons for 5 seconds.
2. Watch should generate a 1 second beep to conrm.
3. Watch should turn on lamp and all LCD segments.
4. Ensure all buttons are released before continuing
further.
5. Wait for 2 seconds.
6. Watch should turn o all LCD segments.
7. Watch should display the module number for 2
seconds.
8. Watch should display the software release number
for 2 Seconds.
9. Watch should display the build number for 2
seconds.
10. Watch should turn o lamp.
11. Reset is nished watch will go to the Time of Day
application.