Billabong Phasher - Calibrating the Compass

8.
ENGLISH
YEAR
Press the START button to increment & the
RESET buttons to decrement the year setting.
(Hold the buttons for 2 seconds to speed up
the increment or decrement)
Press the MODE button to go to the
next setting.
MONTH
Press the START button to increment & the
RESET buttons to decrement the month set-
ting. (Hold the buttons for 2 seconds to speed
up the increment or decrement)
Press the MODE button to go to the
next setting.
DATE
Press the START button to increment & the
RESET buttons to decrement the date setting.
(Hold the buttons for 2 seconds to speed up
the increment or decrement)
Press the MODE button to go to the
next setting.
DATE FORMAT
The date can be displayed in “M-D” or
“D-M” format.
Press the START button or the RESET button to
change the DATE FORMAT setting.
Press the MODE button to go to the
next setting.
CALIBRATING THE COMPASS:
IMPORTANT: Before using the compass MUST be calibrated
for accurate readings.
Accurate calibration is best done outside and away from
strong magnetic forces and large metal objects.
You can calibrate the watch for MAGNETIC NORTH, but for
TRUE NORTH an OFFSET is required.
See the compass setting procedure on page 19.
See the compass oset list on page 27.