How to reset Billion Network Router password?
If you have forgotten your login username or password for your Billion Network Router, try using the default username 'admin' and password 'admin'. If this doesn't work, restore your router to its factory settings by pressing the reset button on the rear side of the device.
What to do if I cannot PING any PC on Billion BiPAC 4700ZUL Network Router LAN?
If you cannot PING any PC on your Billion Network Router LAN, here are a few things you can check: * First, check the Ethernet LEDs on the front panel. The LED should be on for the port that has a PC connected. If it is not lit, ensure the cable between your router and the PC is properly connected. * Second, make sure you have uninstalled your firewall program before troubleshooting. * Third, verify that the IP address and the subnet mask are consistent for both the router and the workstations.
What to do if no LEDs are on on my Billion BiPAC 4700ZUL?
If none of the LEDs are on when you turn on your Billion Network Router, check the connection between the router and the adapter. If the problem persists, it is most likely due to a hardware malfunction. Please contact your service provider for technical support.
General| WAN Ports | 1 |
|---|---|
| Security | WEP, WPA, WPA2, WPS |
| VPN Support | IPSec, PPTP, L2TP |
| LAN Ports | 4 |
| Wireless Standard | 802.11g |
| DSL Standard | ADSL2+, VDSL2 |
| Weight | 0.4 kg |
| Device Type | ADSL2+/VDSL2 Wireless-N VPN Firewall Router |
To Next Page
