Binder B 28 - User Manual

Issue 07/2017 Art. No. 7001-0001
Operating Manual
B 28
Incubators with mechanical adjustment
E 28
Drying and heating ovens with mechanical
adjustment
Model Model version Art. no.
B 28
B028-230V
9010-0002, 9110-0002
B 28 with thermostat class 1
B028-230V-T
9010-0004, 9110-0004
B 28 (120 V)
B028-120V
9010-0067, 9110-0067
E 28
E028-230V
9010-0001, 9110-0001
E 28 with thermostat class 1
E028-230V-T
9010-0003, 9110-0003
E 28 (120 V)
E028-120V
9010-0106, 9110-0106
BINDER GmbH
 Address: Post office box 102, 78502 Tuttlingen, Germany  Phone: +49 7462 2005 0
 Fax: +49 7462 2005 100  Internet: http://www.binder-world.com
 E-mail: info@binder-world.com  Service Hotline: +49 7462 2005 555
 Service Fax: +49 7462 2005 93 555  Service E-Mail: service@binder-world.com
 Service Hotline USA: +1 866 885 9794 or +1 631 224 4340 x3
 Service Hotline Asia Pacific: +852 390 705 04 or +852 390 705 03
 Service Hotline Russia and CIS: +7 495 988 15 16

Summary

1. Safety

1.2.1 Signal word panel

Defines the signal word panels and their associated safety colors.

1.2.2 Safety alert symbol

Explains the use of the safety alert symbol and its meaning.

1.2.3 Pictograms

Presents a table of warning, mandatory action, and prohibition pictograms.

1.3 Localization; position of safety labels on the chamber

Shows the location of safety labels on the chamber itself.

1.4 Type plate

Provides information about the product's type plate details and symbols.

1.5 General safety instructions on installing and operating the chambers

Outlines general safety rules for installing and operating the chambers.

1.6 Intended use

Defines the approved applications and limitations for the chambers.

3. Completeness of delivery, transportation, storage, and installation

3.4 Location of installation and ambient conditions

Specifies the ideal location and ambient conditions for chamber installation.

4. Installation of the equipment

4.1 Electrical connection

Details the electrical connection requirements and safety precautions.

5. Start up

5.1 Turning on the chamber

Explains the procedure for turning the chamber on using its main controls.

5.1.1 Turning on the B 28 incubator by the main power switch

Details the start-up procedure for the B 28 incubator.

5.1.2 Turning on the E 28 drying and heating oven by the 0-120 minutes timer

Details the start-up procedure for the E 28 drying and heating oven.

5.2 Temperature setting

Describes how to set the desired temperature using the thermostat controls.

7. Maintenance, cleaning, and service

7.1 Maintenance intervals, service

7.2 Cleaning and decontamination

7.2.1 Cleaning

7.2.2 Decontamination

Binder B 28 Specifications

General

Brand	Binder
Model	B 28
Category	Laboratory Equipment
Language	English