Binder BD-S 56 - Type Plate

BD-S / BD-S-UL, ED-S / ED-S-UL, FD-S / FD-S-UL (E1) 05/2019 page 7/59
1.4 Type plate
The type plate is located on the left-hand side of the chamber, bottom right-hand.
Figure 2: Type plate (example BD-S 115-230V regular chamber)
Indications of the type plate (example)
Information
BINDER
Manufacturer: BINDER GmbH
BD-S 115
Model designation
Incubator
Chamber name: Incubator
Drying and heating oven
Chamber name: Drying and heating oven
Serial No.
000000000000
Serial No of the chamber
Built
2018
Year of construction
Nominal temperature
70 °C
158 °F
Nominal temperature
IP protection
20
IP type of protection acc. to EN 60529
Temp. safety device
DIN 12880
Temperature safety device acc. to standard DIN 12880
Class
3.1
Class of temperature safety device
Art. No.
9090-0022
Art. no. of the chamber
Project No.
---
Optional: Special application acc. to project no.
1,30 kW
Nominal power
5,7 A
Nominal current
230 V / 50 Hz
Nominal voltage +/- 10%
at the indicated power frequency
230 V / 60 Hz
1 N ~
Current type
Symbol on the type plate
Information
CE conformity marking
Electrical and electronic equipment manufactured / placed
on the market in the EU after 13 August 2005 and to be
disposed of in a separate collection according to Directive
2012/19/EU on waste electrical and electronic equipment
(WEEE).
The chamber is certified according to Customs Union
Technical Regulation (CU TR) for the Eurasian Economic
Union (Russia, Belarus, Armenia, Kazakhstan Kyrgyzstan).
GS mark of conformity of the “VDE Prüf- und Zertifizier-
ungsinstitut” (Testing and Certification Institute of the Asso-
ciation for Electrical, Electronic and Information Technolo-
gies
Nominal temp.
70 °C
0,35 kW / 1,6 A
158 °F
230 V / 50 Hz
IP protection
20
230 V / 60 Hz
Safety device
DIN 12880
1 N ~
Class
3.1
Art. No.
9090-0022
Project No.
Built
2018
Drying and heating oven
BINDER GmbH
Im Mittleren Ösch 5
78532 Tuttlingen / Germany
www.binder-world.com
BD-S 115
E1
Serial No. 00000000000000
Made in Germany