To Next PageTo Next PageWhat to do if there is insufficient drying and aeration of the Binder Accessories chamber after using disinfectant spray?
If you notice insufficient drying and aeration of the chamber after using disinfectant spray, allow the chamber to dry thoroughly, and aerate it sufficiently.
How to prevent chemical burns from Binder Solid.Line BD-S 56 Accessories disinfectant spray?
To prevent chemical burns, use sealed protective goggles when using the disinfectant spray.
General| Brand | Binder |
|---|---|
| Model | Solid.Line BD-S 56 |
| Category | Accessories |
| Language | English |
Qualification requirements for personnel operating the chamber.
General safety guidelines for installation and operation.
Specifies the approved and improper uses of the chamber.
Lists potential misuses of the chamber and associated risks.
Identifies unavoidable risks and necessary precautions.
Requirements for installation site and environmental conditions.
Details on connecting the chamber to the power supply.
Description of the Class 1 safety device and its cut-off temperatures.
Function and types of the adjustable safety controller.
How to set the safety controller's limit temperature.
How to handle alarm messages and safety controller actions.
Procedures and recommended agents for cleaning the chamber.
Methods for decontamination and chemical disinfection.
Requirements for personnel performing maintenance.
Basic troubleshooting steps for common chamber issues.
Specifications for chamber dimensions, temperature, power, etc.
