Binder BF 53 User Manual

Issue 05/2016 Art. No. 7001-0081
Operating Manual
BF – Incubators with forced convection
with microprocessor temperature controller
Model Model version Art. No.
BF 53 BF053-230V 9010-0235, 9110-0235
BF 53-UL BF053UL-120V 9010-0236, 9110-0236
BF 115 BF115-230V 9010-0237, 9110-0237
BF 115-UL BF115UL-120V 9010-0238, 9110-0238
BF 240 BF240-230V 9010-0239, 9110-0239
BF 240-UL BF240UL-120V 9010-0240, 9110-0240
BF 400 BF400-230V 9010-0241, 9110-0241
BF 400-UL BF400UL-120V 9010-0242, 9110-0242
BF 720 BF720-230V 9010-0243, 9110-0243
BF 720-UL BF720UL-120V 9010-0244, 9110-0244
BINDER GmbH
Address Post office box 102
D-78502 Tuttlingen
Tel. +49 7462 2005 0
Fax +49 7462 2005 100
Internet http://www.binder-world.com
E-mail info@binder-world.com
Service Hotline +49 7462 2005 555
Service Fax +49 7462 2005 93 555
Service E-Mail service@binder-world.com
Service Hotline USA +1 866 885 9794 or +1 631 224 4340 x3
Service Hotline Asia Pacific +852 390 705 04 or +852 390 705 03
Service Hotline Russia and CIS +7 495 988 15 16

Binder BF 53 Specifications

General

Brand	Binder
Model	BF 53
Category	Accessories
Language	English

Summary

1. Safety

1. Safety (Continued)

1.5 General Safety Instructions for Installation & Operation

Provides essential safety guidelines for chamber installation and operation.

Explosion Hazard and Combustible Substances

Warns against introducing combustible/explosive substances and mixtures.

1.6 Intended Use

Defines the approved applications and limitations for the chambers.

1.5.1 Overheating and Ventilation Warnings

Warns about overheating risks and emphasizes ventilation requirements.

Electrical Hazard and Water Exposure

Warns against water exposure during operation or maintenance.

Explosion/Implosion Hazard Details

Details specific hazards related to explosive or toxic substances.

1.5.2 Explosion Hazard in Hazardous Locations

Alerts to explosion risks when operating in hazardous environments.

Hot Surface Warning

2. Chamber Description

2.1 Chamber Overview

3. Delivery, Transportation, Storage, and Installation (Continued)

3.2 Safe Lifting and Transportation Guidelines

3.4 Installation Location and Ambient Conditions

Overheating and Ventilation Precautions

Warns about overheating risks and emphasizes ventilation requirements.

Explosion Hazard at Installation Site

Alerts to explosion risks when operating in hazardous environments.

4. Equipment Installation

4.1 Electrical Connection

Details the process for connecting the chamber to the power supply.

Incorrect Power Supply Voltage Warning

Warns about potential damage from incorrect voltage connections.

4. Equipment Installation (Continued)

Hot Exhaust Duct Warning

5.1 Turning On the Chamber

Details the steps for powering on the chamber and initial checks.

5. Start Up

6. Controller Setting

6.1 Temperature and Fan Speed Set-points (No Ramp)

Guides setting temperature and fan speed without ramp function.

6. Controller Setting (Continued)

6.2 Temperature and Fan Speed Set-points (With Ramp)

Guides setting temperature and fan speed with ramp function.

6.3 Time Functions: Continuous and Timer Operation

Explains how to use continuous and timer operation modes.

6.3.1 Switching Between Operation Modes

6.3.3 Setting Timer Values

Guides setting specific time values for timer operation.

6.3.2 Continuous Operation

6.4 User Level Settings

6.4 User Level Settings (Continued)

6.4.4 Selecting Timer Function

6.4.5 Interface Mode and Printer Interval Settings

6.4.2 Entering a Temperature Ramp

Explains how to program temperature ramps for controlled heating.

7. Temperature Safety Device Class 3.1 (DIN 12880)

7.1 Function of the Safety Device

Details how the temperature safety device operates to protect the chamber and contents.

7.2 Adjustment of the Safety Device

Provides step-by-step instructions for adjusting the safety device.

8. Options

8.2 APT-COM™™ Communication Software

8. Options (Continued)

9. Maintenance, Cleaning, and Service

9.1 Maintenance Intervals and Service

Specifies recommended maintenance schedules and service procedures.

Electrical Hazards During Maintenance

Warns about electrical hazards during maintenance and cleaning.

9. Maintenance, Cleaning, and Service (Continued)

9.2 Cleaning and Decontamination

9.2.2 Decontamination Procedures

Outlines procedures for decontaminating the chamber after exposure to hazardous substances.

9.2.1 Cleaning Procedures

10. Disposal

10. Disposal (Continued)

11. Troubleshooting

Temperature Related Faults

Lists temperature-related faults and their required corrective measures.

Controller Related Faults

Lists controller-related faults and their required corrective measures.

12. Technical Description

12. Technical Description (Continued)

12.4 Technical Data

12.5 Equipment and Options (Extract)

Options and Accessories List