Binder BF 53 - 1.5 General Safety Instructions for Installation & Operation; 1.5.1 Overheating and Ventilation Warnings; 1.5.2 Explosion Hazard in Hazardous Locations

BF (E1) 05/2016 page 8/58
Symbol on the type plate
Information
CE conformity marking
Electrical and electronic equipment manufactured / placed on the
market in the EC after 13 August 2005 and to be disposed of in a
separate collection according to directive 2002/96/EC on waste
electrical and electronic equipment (WEEE).
GS mark of conformity of the “VDE Prüf- und Zertifizierungsinstitut”
(Testing and Certification Institute of the Association for Electrical,
Electronic and Information Technologies
or
The equipment is certified in the GOST R certification system of
GOSTSTANDARD Russia.
The equipment is certified according to Customs Union Technical
Regulation (CU TR) for Russia, Belarus and Kazakhstan
(UL chambers
only)
The equipment is certified by Underwriters Laboratories Inc.
®
according to standards UL 61010A-1, UL 61010A-2-10, CSA C22.2
No. 1010.1-92, and CSA C22.2 No. 1010.2.010-94.
1.5 General safety instructions on installing and operating the chambers
With regard to operating the chambers and to the installation location, please observe the DGUV
guidelines 213-850 on safe working in laboratories (formerly BGI/GUV-I 850-0, BGR/GUV-R 120 or ZH
1/119, issued by the employers’ liability insurance association) (for Germany).
BINDER GmbH is only responsible for the safety features of the chamber provided skilled electricians or
qualified personnel authorized by BINDER perform all maintenance and repair, and if components relating
to chamber safety are replaced in the event of failure with original spare parts.
To operate the chamber, use only original BINDER accessories or accessories from third-party suppliers
authorized by BINDER. The user is responsible for any risk caused by using unauthorized accessories.
CAUTION
Danger of overheating.
Damage to the chamber.
∅ Do not install the chamber in unventilated recesses.
 Ensure sufficient ventilation for dispersal of the heat.
Do not operate the chambers in hazardous locations.
DANGER
Explosion hazard.
Danger of death.
∅ Do NOT operate the chamber in potentially explosive areas.
 KEEP explosive dust or air-solvent mixtures AWAY from the chamber.