To Next PageTo Next Page
Need help?Do you have a question about the Binder CB 170 and is the answer not in the manual?
General| Brand | Binder |
|---|---|
| Model | CB 170 |
| Category | Accessories |
| Language | English |
Overview of BINDER CB CO2 Incubators with O2 Control and Active Humidification.
Contact and address details for BINDER GmbH.
Explanation of safety definitions, signal words, symbols, and pictograms.
General safety guidelines and precautions for handling gases.
Intended use, accident prevention, and humidity sensor resistance.
Location of safety labels and information on the type plate.
General layout, inner chamber materials, and door lock features.
Description of CO2 infrared, O2 control, and humidity systems.
Instructions for unpacking, checking, lifting, transporting, and storing the chamber.
Requirements for the installation location and environmental factors.
Shelf installation, Permadry™ water pan, and O2 sensor connection.
Procedures for connecting gas cylinders.
Water supply for humidification and electrical connection steps.
Handling the divided inner door and connecting gas hoses.
Operating functions, display views, and controller icons.
Overview of operating modes and the controller's menu system.
Controller entries, power failure performance, and door opening effects.
Steps for turning on the chamber and initial controller settings.
Altitude entry, factory settings, equilibration times, and door lock operation.
Gas supply needs and activating/deactivating control functions.
Adjusting humidity using the Permadry™ system.
Entering setpoints via menus, direct display, and configuring special functions.
Safety instructions for setting high CO2, O2, and N2 concentrations.
Starting, stopping, pausing, and canceling timer programs.
Creating, managing programs, entering values, and transitions.
Saving programs and repeating sections.
Starting, canceling, creating, and managing week programs.
Entering values, transitions, and configuring special functions.
Overview of notifications, alarm messages, and their visual/audible indicators.
Configuring tolerance ranges and delay times for alarms.
Description and connection of the zero-voltage relay alarm output.
Details on class 1 and class 3.1 over-temperature safety devices.
Safety controller modes, settings, and alarm management.
Explanation of user authorization levels and password protection.
Procedures for logging in/out, changing users, and managing passwords.
Using activation codes to unlock controller functions.
Setting controller language, date, time, and temperature units.
Adjusting display parameters and calibrating the touchscreen.
Configuring serial RS485, Ethernet, Web server, Email, and USB data transfer.
Contact page and technical details of the chamber.
Accessing current parameters and viewing the event list.
Navigating views, controlling legend, and showing/hiding indications.
Using history display, curve selection, search, zoom, and setting chart parameters.
Explanation of the humidifying system and water supply requirements.
Communication software, access ports, and interior socket options.
Data loggers, gas supply services, stands, and other optional accessories.
Methods for measuring CO2 and temperature references.
Cell culture practices and chamber features to minimize contamination.
Guidelines for cleaning and decontaminating the chamber.
Steps for hot-air sterilization and managing premature termination.
Maintenance schedule, component checks, and replacement procedures.
Instructions for returning the chamber and service contact details.
Guidelines for disposing of packing and decommissioning the chamber.
Disposal regulations for Germany, EU, and non-EU states.
Troubleshooting common issues with chamber function, heating, and gas supply.
Troubleshooting concentration, humidity, sterilization, and controller errors.
Addressing door open alarms and other controller-related faults.
Calibration, protection, usable volume, and detailed technical specifications.
Lists of equipment, options, accessories, conversions, and dimensions.
The official EU declaration of conformity document.
Instructions for registering the product online.
Certificate requirements for returns outside USA/Canada and general process.
Specific return authorization form for North American customers.
