CB (E7) 06/2018 Page 163/174
25.6 Accessories and spare parts (extract)
BINDER GmbH is responsible for the safety features of the chamber only, provided skilled
electricians or qualified personnel authorized by BINDER perform all maintenance and repair,
and if components relating to chamber safety are replaced in the event of failure with original
spare parts. The user is responsible for any risks arising from using unauthorized
accessories/components.
Perforated shelf, stainless steel
Divided shelves (1 level) for divided inner door, stainless steel
6004-0226
Door gasket for outer chamber door
Door gasket for inner glass door or for divided inner door
Door gasket for individual glass door of divided inner door
Individual glass door of divided inner door, complete
Stacking stand with castors lockable by breaks
Stacking adapter for direct, thermally decoupled stacking
Stacking adapter for combination C 150/160/170 on top of CB 170
CELLROLL roller system with set of connection cables and extra-low voltage access
port
8012-0571
Plug for optional silicon access port d30
Gas cylinder connection kit for CO
2
Gas cylinder connection kit for O
2
Gas cylinder connection kit for N
2
Chamber fuse 5x20mm 250 V 10 A time-lag (T)
Chamber fuse 6.3x32mm 250V 12.5 A time-lag (T) for CUL version only
O
2
sensor for chamber with regular equipment: hypoxic control range 0.2 up to 20
5002-0084
2
sensor for chamber with O
2
control with optional alternative control range 10 up to
95 vol.-% O
2
5002-0085
Humidity sensor for chamber with active humidification
Fresh water bag (0.9 liters / 0.32 cu.ft.)
Cartridge for BINDER Pure Aqua Service
Cleaning kit (neutral cleaning agent, disinfection spray and lint-free disposable
wipes, protective gloves and goggles)
8012-0503
Neutral cleaning agent, 1 kg
Qualification folder IQ-OQ
Qualification folder IQ-OQ-PQ
To Next Page
Loading...
