Binder Solid.Line BD-S 56 - Equipment and options (extract); Accessories and spare parts (extract)

BD-S / BD-S-UL, ED-S / ED-S-UL, FD-S / FD-S-UL (E1) 03/2022 page 37/60
All technical data is specified for unloaded chambers with standard equipment at an ambient temperature
of +22 °C +/- 3°C / 71.6 °F +/- 5.4 °F and a power supply voltage fluctuation of +/-10%. Technical data is
determined in accordance to BINDER Factory Standard Part 2:2015 and DIN 12880:2007.
All indications are average values, typical for chambers produced in series. We reserve the right to
change technical specifications at any time.
If the chamber is fully loaded, the specified heating up times may vary according to the load.
14.5 Equipment and options (extract)
To operate the chamber, use only original BINDER accessories or accessories / components
from third-party suppliers authorized by BINDER. The user is responsible for any risk arising
from using unauthorized accessories.
Standard equipment
R-S microprocessor temperature controller
Timer function “Delayed Off”
BD-S / BD-S-UL: Temperature safety controller class 3.1 acc. to DIN 12880:2007 with visual alarm
ED-S / ED-S-UL, FD-S / FD-S-UL: Temperature safety controller class 2 acc. to DIN 12880:2007 with
visual alarm
BD-S / BD-S-UL: Inner glass door
Exhaust air outlet, internal diameter 50 mm / 1.97 inches, with exhaust air flap
Adjustable air change via exhaust air outlet
1 rack, chrome-plated, with 4 rack supports
Options / accessories
Rack, chrome-plated
Neutral cleaning agent (liquid concentrate)
Stable table on wheels with castors and locking brakes
14.6 Accessories and spare parts (extract)
BINDER GmbH is responsible for the safety features of the chamber only, provided skilled
electricians or qualified personnel authorized by BINDER perform all maintenance and repair,
and if components relating to chamber safety are replaced in the event of failure with original
spare parts. The user is responsible for any risks arising from using unauthorized accesso-
ries/components.
Chamber size
56
115
Description
Art. No.
Rack, chrome-plated
6004-0209
6004-0210
Door gasket, silicone
6005-0287
6005-0288
Stable table on wheels with castors and locking brakes
9051-0005
Chamber fuse 5x20mm 250V 6,3 A time lag (T)
5006-0092
Chamber fuse 5x20mm 250V 12,5 A time lag (T) for UL chambers
5006-0096
4 rack supports
8012-1879
Neutral cleaning agent, 1 kg
1002-0016
For information on components not listed here, please contact BINDER Service.