BD-S / BD-S-UL, ED-S / ED-S-UL, FD-S / FD-S-UL (E1) 03/2022 page 8/60
1.6 Type plate
The type plate is located on the left-hand side of the chamber, bottom right-hand.
Figure 2: Type plate (example BD-S 115-230V regular chamber)
Indications of the type plate (example)
Manufacturer: BINDER GmbH
Chamber name: Drying and heating oven
Nominal temperature
Nominal temperature
IP type of protection acc. to EN 60529
Temperature safety device acc. to standard DIN 12880
Class of temperature safety device
Optional: Special application acc. to project no.
Nominal voltage +/- 10%
at the indicated power frequency
Symbols on the type plate
Symbol Valid for Information
All chambers CE conformity marking
All chambers
Electrical and electronic equipment manufactured / placed
on the market in the EU after 13 August 2005 and to be dis-
posed of in a separate collection according to Directive
2012/19/EU on waste electrical and electronic equipment
(WEEE).
Not for UL chambers
GS mark of conformity of the “VDE Prüf- und Zertifizier-
ungsinstitut” (Testing and Certification Institute of the Asso-
ciation for Electrical, Electronic and Information Technolo-
gies
Not for UL chambers
The chamber is certified according to Customs Union Tech-
nical Regulation (CU TR) for the Eurasian Economic Union
(Russia, Belarus, Armenia, Kazakhstan Kyrgyzstan).
Class 3.1
Im Mittleren Ösch 5
78532 Tuttlingen / Germany
Serial No. 00000000000000
Made in Germany
To Next Page
Loading...
