To Next PageTo Next PageWhat does '1999' mean on my Binder ED 53 display?
If you see the message '1999' on your Binder Climate chamber's controller display, it indicates a sensor rupture between the sensor and the controller, in that case contact BINDER service.
General| Brand | Binder |
|---|---|
| Model | ED 53 |
| Category | Climate chamber |
| Language | English |
Provides essential safety guidelines for installing, operating, and maintaining the chambers.
Defines the approved applications for the chambers, including tempering, drying, and heat treatment.
Lists safety measures implemented by the manufacturer to prevent ignition and explosions.
Instructions for checking the chamber and accessories for damage and completeness upon arrival.
Provides detailed safety procedures for lifting, moving, and transporting the chamber.
Specifies requirements for the installation site, ventilation, ambient temperature, and humidity.
Details electrical connection requirements, including power plugs, voltage, and safety precautions.
Step-by-step guide for powering on the chamber and understanding initial display states.
Procedure for setting the target temperature when not using ramp functions.
How to set temperature values when a programmed temperature ramp is active.
Explains how to use continuous operation and timer functions for specific process durations.
Details the function, testing, and setting of the Class 2 temperature safety device for ED/FD models.
Details the function, testing, and setting of the Class 3.1 temperature safety device for BD models.
Recommends regular maintenance and service procedures to ensure optimal performance and safety.
Provides instructions for cleaning the chamber after use and for decontamination procedures.
