To Next PageTo Next Page
Need help?Do you have a question about the Binder KBF 115 (E5.2) and is the answer not in the manual?
General| Brand | Binder |
|---|---|
| Model | KBF 115 (E5.2) |
| Category | Climate chamber |
| Language | English |
Provides general safety guidelines for installation and operation.
Defines the intended use of the climatic chambers.
Details how to input temperature, humidity, and fan speed set points.
Guides on entering programs using the controller menu.
Explains how to input temperature and fan speed in programs.
Guides on entering humidity values for program sections.
Explains the difference between gradual and sudden set-point changes.
Provides examples for programming set-point ramps and steps.
Guides on how to start stored programs.
Describes the internal Class 1 safety device for over-temperature protection.
Explains the Class 3.1 safety controller for material protection.
Details the 'Limit' and 'Offset' types for safety controller set-points.
Guides on how to check and set the safety controller parameters.
Describes the optional Class 3.3 over/under temperature safety device.
Explains the unit's auto diagnosis system for notifications and alarms.
Guides on how to acknowledge and reset alarm messages.
Explains the operation of the humidity generation and removal systems.
Outlines required maintenance schedules and service procedures.
Provides instructions for cleaning and decontaminating the unit.
Lists common heating problems and their solutions.
Addresses problems with low or no refrigerating performance.
Covers issues related to humidity fluctuations and accuracy.
Lists common controller errors and troubleshooting steps.
